Tổng lượt truy cập : 291212

Hỗ trợ trực tuyến

Anh Duy - 0946.733.151
Anh Hải - 0902.797.135

Trang nhất » Sản phẩm » HMI Proface thông dụng » GP4000 » 3.5 inch

Proface PFXGP4201TAD


Xem ảnh lớn
Mã sản phẩm: S000137

Dòng sản phẩm thông dụng hiện nay. Thay thế cho các loại màn hình 3.5 inch của các dòng cũ GP2000, GP3000

Hãng sản xuất : Digital Electonics Corporation
Khuyến mại : Vui lòng liên hệ
Bảo hành : 12 tháng

Chia sẻ :
Vui lòng tải file pdf đính kèm. Hoặc gọi 0946733151 gặp Duy để được hỗ trợ.

Standard product information
Family 
HMI
Series 
GP4000 Series
Size 
3"
Model 
PFXGP4201TAD
Global Code 
PFXGP4201TAD
Product Features 
3" DC Analog
Repair Status 
✔ (Repair service is available, reparable.)
Display specifications
Display type 
TFT Color LCD
Display size 
3.5"
Resolution 
320 x 240 pixels (QVGA)
Effective display area 
W70.56 x H52.92 mm [W2.78 x H2.08 in.]
Display colors 
65,536 Colors (No blink) / 16,384 Colors (Blink)
Backlight 
White LED (Not user replaceable. When replacement is required, contact your local distributor.)
Backlight service life 
50,000 hrs. or more (each in continuous operation at 25 °C [77 °F] before backlight brightness decreases to 50%)
Brightness control 
16 Levels (Adjusted with touch panel or software)
Touch panel type 
Resistive Film (analog)
Touch panel resolution 
1,024 x 1,024
Touchpanel lifetime 
1,000,000 times or more
Language fonts 
Japanese: 6,962 (JIS Standards 1 & 2) (including 607 non-kanji characters), ANK: 158 (Korean, Traditional Chinese and Simplified Chinese fonts are downloadable.)
Character sizes 
Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts, Stroke font: 6 to 127 pixel fonts, Image font: 8 to 72 pixel fonts
Font sizes 
Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times.*1
8 x 8 dots 
40 char. x 30 rows
8 x 16 dots 
40 char. x 15 rows
16 x 16 dots 
20 char. x 15 rows
32 x 32 dots 
10 char. x 7 rows

1Other font sizes can be set up with the Editor software.

Electrical specifications
Rated input voltage 
24 Vdc
Input voltage limits 
19.2 to 28.8 Vdc
Allowable voltage drop 
2 ms or less
Power consumption 
9.6 W or less
In-rush current 
30 A or less
Voltage endurance 
1,000 Vac, 20 mA for 1 minute (between charging and FG terminals)
Insulation resistance 
500 Vdc, 10 MΩ or more (between charging and FG terminals)
Environmental specifications
International safety standards 
abs.gifbv.gifce.gifclassnk.gifctick.gifdnv.gifeac.gifgl.gifkc.gifrina.giful508.giful508ansi.gif
Surrounding air temperature 
0 to 50 °C [32 to 122 °F]
Storage temperature 
-20 to +60 °C [-4 to 140 °F]
Ambient humidity 
10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. - no condensation)
Storage humidity 
10 to 90 % RH (Wet bulb temperature : 39 °C [102.2 °F] max. - no condensation)
Dust 
0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels)
Pollution degree 
For use in Pollution Degree 2 environment
Corrosive gases 
Free of corrosive gases
Air pressure (altitude range) 
800 to 1,114 hPa (2,000 m [6,561 ft.] above sea level or less)
Vibration resistance 
IEC/EN 61131-2 compliant
5 to 9 Hz single amplitude 3.5 mm [0.14 in.]
9 to 150 Hz fixed acceleration : 9.8 m/s2
X, Y, Z directions for 10 cycles (approx. 100 min.)
Concussion resistance 
IEC/EN 61131-2 compliant 147 m/s2, X, Y, Z directions for 3 times
Noise immunity 
Noise Voltage : 1,000 Vp-p
Pulse Duration : 1 µs
Rise Time : 1 ns
(via noise simulator)
Electrostatic discharge immunity 
Contact Discharge Method: 6 kV (IEC/EN61000-4-2 Level 3)
Memory
Application memory 
FLASH EPROM 16 MB (including a logic program area)
Data backup 
SRAM 320 KB (Rechargeable Lithium battery for backup memory)
Logic program area 
FLASH EPROM 132 KB (Equivalent to 15,000 steps)*2
Variable area 
SRAM 64 KB (Rechargeable Lithium battery for backup memory)
Clock accuracy 
±65 sec./month (deviation at room temperature and power is OFF)*3

2Up to 60,000 steps can be converted in software. However, this reduces application memory capacity (for screen data) by 1 MB.

3Depending on the operating temperature and age of unit, the clock can deviate from -380 to +90 sec./month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.

Interface specifications
Serial (COM1) 
Asynchronous Transmission: RS-232C / 422 / 485, Data Length: 7 or 8 bits, Parity: None, Even or Odd, Stop Bit: 1 or 2 bits, Data Transmission Speed: 2,400 bps to 115,200 bps, 187,500 bps (MPI), Connector: D-Sub9 (plug)
USB (Type A) 
Conforms to USB 2.0 (Type A) x 1
Power supply voltage: 5 Vdc ±5 %
Output Current: 500 mA or less
Communication distance: 5 m [16.4 ft.] or less
USB (mini-B) 
Conforms to USB 2.0 (mini-B) x 1, Communication Distance: 5 m [16.4 ft] or less
Ethernet 
IEEE802.3i / IEEE802.3u, 10BASE-T / 100BASE-TX, Connector: Modular jack (RJ-45) x 1
Structural specifications
Grounding 
Functional grounding: Grounding resistance of 100 Ω, 2mm2 (AWG 14) or thicker wire, or your country's applicable standard. (Same for FG and SG terminals)
Cooling method 
Natural air circulation
Structure 
IP65f NEMA #250 TYPE 4X/13 (on the front panel when properly installed in an enclosure)*4
External dimensions 
W132 x H106 x D42 mm [W5.2 x H4.17 x D1.65 in.]
Panel cut-out dimensions 
W118.5 x H92.5 mm [W4.67 x H3.64 in.]
Panel thickness area: 1.6 to 5 mm [0.06 to 0.2 in.]*5
Weight 
0.4 kg [0.89 lb] or less

4The front face of the GP unit, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification. Even though the GP unit's level of resistance is equivalent to these standards, oils that should have no effect on the GP can possibly harm the unit. This can occur in areas where either vaporized oils are present, or where low viscosity cutting oils are allowed to adhere to the unit for long periods of time. If the GP's front face protection sheet becomes peeled off, these conditions can lead to the ingress of oil into the GP and separate protection measures are suggested. Also, if non-approved oils are present, it may cause deformation or corrosion of the front panel's plastic cover. Therefore, prior to installing the GP unit, be sure to confirm the type of conditions that will be present in the GP's operating environment. If the installation gasket is used for a long period of time, or if the unit and its gasket are removed from the panel, the original level of the protection cannot be guaranteed. To maintain the original protection level, be sure to replace the installation gasket regularly.

5Regarding dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.]. Even if the installation wall thickness is within the recommended range for the "Panel Cut Dimensions", depending on wall's material, size, and installation location of GP unit and other devices, the installation wall could warp. To prevent warping, the installation surface may need to be strengthened.

Dimensions
External dimensions 
gp4200_dimensions_e.gif
Panel cut-out dimensions 
gp4200_panelcut_e.gif
External dimensions with cable 
gp4201t_cable_dimensions_e.gif

Sản phẩm này không có hình ảnh khác

Sản phẩm cùng loại