CÔNG TY TNHH KỸ THUẬT ĐIỆN
| Display type | TFT Color LCD |
| Display size | 4.3" wide |
| Resolution | 480 x 272 pixels |
| Effective display area (W x H) | W95 x H53.9 mm |
| Display colors | 65,536 colors |
| Backlight | White LED (Not user replaceable. When replacement is required, contact your local distributor.) |
| Backlight service life | 50,000 hours or more |
| Brightness control | 16 levels (Adjusted with touch panel) |
| Power supply | Rated input voltage | 12 to 24 Vdc | |
| Input voltage limits | 10.2 to 28.8 Vdc | ||
| Voltage drop | 12 Vdc: 1 ms or less 24 Vdc: 3 ms or less | ||
| Power consumption | When power is not supplied to USB devices | 3.4 W or less | |
| When power is supplied to USB devices | 7.5 W or less | ||
| In-rush current | 12 Vdc: 20 A or less 24 Vdc: 40 A or less | ||
| Voltage endurance | 1,000 Vac, 20 mA for 1 minute (between charging and FG terminals) | ||
| Insulation resistance | 500 Vdc, 10 MΩ or more (between charging and FG terminals) | ||
| International safety standard |  | |
| Physical environment | Surrounding air temperature | 0 to 50℃ (32 to 122 ℉) *1 |
| Storage temperature | -20 to 60℃ (-4 to 140℉) | |
| Surrounding air and storage humidity | 10% to 90% RH (Non condensing, wet bulb temperature 39 ℃ [102.2 ℉] or less) | |
| Dust | 0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels) | |
| Pollution degree | For use in Pollution Degree 2 environment | |
| Corrosive gases | Free of corrosive gases | |
| Atmospheric pressure (operating altitude) | 800 to 1,114 hPa (2,000 m [6,561 ft.] or lower) | |
| Mechanical environment | Vibration resistance | IEC/EN 61131-2 compliant 5 to 9 Hz Single amplitude 3.5 mm (0.14 in.) 9 to 150 Hz Fixed acceleration: 9.8 m/s2 X, Y, Z directions for 10 cycles (approximately 100 min.) |
| Shock resistance | IEC/EN 61131-2 compliant 147 m/s2, X, Y, Z directions for 3 times | |
| Electrical environment | Electrostatic discharge immunity | Contact discharge method: 6 kV (IEC/EN 61000-4-2 Level 3) |
| Application memory | 8 MB |
| Backup memory | FLASH EPROM 128 KB *2 |
| Serial interface | Asynchronous transmission | RS-232C |
| Data length | 7 or 8 bits | |
| Stop bit | 1 or 2 bits | |
| Parity | None, odd, or even | |
| Data transmission speed | 2,400 (1,200) to 115,200 bps | |
| Connector | 2-piece terminal block 9 pin x 1 | |
| USB (Type A) interface | Connector | USB 2.0 (Type A) x 1 |
| Power supply voltage | 5 Vdc ±5% | |
| Maximum current supplied | 500 mA/port | |
| Maximum transmission distance | Less than 3 m (9.84 ft) | |
| USB (mini-B) interface | Connector | USB 2.0 (mini-B) x 1 |
| Maximum transmission distance | Less than 3 m (9.84 ft) |
| Grounding | Functional grounding: Grounding resistance of 100 Ω, 2 mm2 (AWG 14) or thicker wire, or your country's applicable standard (same for FG and SG terminals). |
| Cooling method | Natural air circulation |
| Structure *3 | IP65F, Type 1, Type 4X (Indoor Use only), Type 13 * on the front panel when properly installed in an enclosure. |
| External dimensions | W124.9 x H90.4 x D38.8 mm (W4.92 x H3.56 x D1.53 in.) |
| Panel cutout dimensions | W112.5 x H77.5 mm (W 4.43 x H3.05 in.) with Panel Cutout Adapter (PFXZCFAD31, sold separately): W105 x H66 mm (W4.13 x H2.6 in.) |
| Weight | 0.22 kg (0.49 lb) or less |
| W | H | X | R |
| 112.5 mm (+1/-0 mm) (4.43 in. [+0.04/-0 in.]) | 77.5 mm (+1/-0 mm) (3.05 in. [+0.04/-0 in.]) | 1.5 to 6 mm (0.06 to 0.24 in.) | 2 to 3 mm (0.08 to 0.12 in.) |
Ý kiến bạn đọc
